Multigauge 5500

Tritex-Logo

Multigauge 5500
...hands free use thickness measurement

The Multigauge 5500 measures with ultrasonic and the triple echo measurement technique through the coating only the metal thickness. Thus, a measurement of the remaining metal thickness without grinding or flexing is possible.

Multigauge-5500-2-smThe Multigauge 5500 was designed for hands free operation (belt clip at the bottom of the device), when climbing on scaffolds, ropes and tank containers.

The Multigauge 5500, with its bright LED display on the device surface allows, even in the dark, read out of the results without problems. This makes also e.g. measurements in tanks possible.

A calibration on non Fe metals can be easily performed by entering the velocity of sound or by calibration to a known work piece.

The rugged body with rubber protects it against damage.

The connected probe is automatically recognized by the device (IPR) including the stored calibration data. Without calibration the probes can be replaced!

The triple echo measurement technique is in acc. to IACS Guidelines for measurements in the marine area required. Relevant certificated are available!

Kit contents:

multigauge-5500-kit

  • Multigauge 5500 with bright LED display
  • measure cable 1,5m
  • 15mm test block
  • spare membranes
  • ultrasonic gel
  • membrane oil
  • batteries
  • Manual
  • calibration certificate
  • probe (frequenz and diameter selectable)
  • belt clip
  • carry case

Optional we offer a leather case to protect the gauge.

Here we offer you even further material for downloading:

Prospect

 

Copyright © 2013 by TX Marine Messsysteme GmbH | Sitemap