Videoskope Fluke DS703 FC
Basically, in all technical processes wear, fatigue, aging and corrosion severely limit the availability and efficiency of technical equipment. Particularly in the field of engines and drive technology and its components, a review is mandatory.
As an example, the wear of injectors / liners can be exemplified. A change in the mixture preparation by worn injectors leads to a poorer combustion of the fuel.
This results in a high emission load and fuel consumption.
Inspection of injector caps / valves or liners when installed, via the access air purge slots, minimizes maintenance time and saves costs for e.g. Seal kits that do not need to be replaced.
This maintenance can be supported by gauges for visual inspection. By means of these measuring devices, the wear and condition of the components, for example in the engine, are accurately determined. This type of inspection has the advantage that it can be tested by suitable methods and techniques, largely non-destructive and non-destructive